LED BOX PRO Light Wall 100x250 cm – double-sided with print
LED BOX PRO light wall 100x250 cm: the narrowest model in the range, a glowing totem under a metre wide. It proves itself everywhere visibility counts: reception areas, shop entrances, narrow stands and shopping centre walkways. Double-sided aluminium frame with a 12 cm profile, 30 LEDs at 24 V (13,500 lm), SEG fabric graphic with silicone edge, tool-free assembly, wheeled transport case included. Choose single- or double-sided print, design and lead time in the configurator. We dispatch the frame alone in 3 working days, with print in 5, in express in 3.
from €338.90 excl. VAT
The price depends on the selected variant. You can check the set contents, printing and lead time in the configurator below.
Loading configuration options…
Double-sided LED wall 100 × 250 cm with your own graphics: frame only in 3 days, with print in 5 working days
The narrowest model in the range, a glowing totem just under a metre wide. The tall, narrow panel needs barely a metre of width, so it fits where a wider wall has no room, and still lights up on both sides. The LED BOX PRO frame has a 12 cm aluminium profile, 30 LEDs at 24 V with a cover and a luminous flux of 13,500 lm; the SEG fabric graphic is fitted into the profile with a silicone edge, without tools. Choose single- or double-sided print, design and production time in the configurator.
- 3 daysWorking days for the frame alone, 5 with print, 3 in express
- 100 × 250 cmbacklit graphics on both sides
- 13,500 lmluminous flux from 30 LEDs
- 23.2 kgweight of the frame with case
Light from within, instead of a lamp above the stand
The LEDs sit in the profile and shine through the fabric, so the graphic is evenly bright across the whole surface and stays legible even in dimly lit rooms.
- Lit by 30 LEDs
24 V power supply, 13,500 lm. The light spreads evenly across the fabric with no visible hotspots.
- Double-sided display
Both sides of the frame take an SEG graphic. You can order double-sided print, or single-sided with white fabric on the back.
- 12 cm aluminium profile
The profile stiffens the frame and houses the LEDs along with the wiring. The frame stands on flat feet, with no visible cables.
- Tool-free assembly
The profiles connect with snap joints, and the graphic with its silicone edge is pressed into the groove. Two people can assemble the wall in about a quarter of an hour.
- Dye sublimation for backlighting
Backlit SEG fabric, full colour, rich tones when lit. You can swap the graphic for the next campaign without changing the frame.
- Wheeled case
Profiles, feet, power supply and fabric travel in a 40 × 30 × 115 cm case.
The whole range shares the same 12 cm profile, the same 250 cm height and the same way of fitting the graphic
LED BOX PRO 100x250 is the narrowest model in the range, a glowing totem just under a metre wide. The whole range shares the same 12 cm profile, the same 250 cm height and the same way of fitting the graphic. The models differ in width, number of LEDs and weight.
- Wall size
- 100 × 250 cm
- Graphic area
- 2.5 m² per side
- Weight with case
- 23.2 kg
- Sizes in the range
- 100, 200, 285, 300 and 400 × 250 cm
- Profile
- Aluminium, 12 cm
- LEDs
- 30 pcs, 24 V
- Luminous flux
- 13,500 lm
- Power supply
- included
- Weight
- 23.2 kg
- Packaging
- 40 × 30 × 115 cm
- Format
- 100 × 250 cm (2.5 m²)
- Fabric
- SEG polyester for backlighting
- Fitting
- Silicone edge
- Sublimation, full colour, single- or double-sided
- Graphic change
- tool-free, in a few minutes
What's included in the base price
Frame with LEDs, power supply and wheeled transport case. You add the graphic in the configurator: single-sided, double-sided, or you can order just the frame for your own print.
- LED BOX PRO frame12 cm aluminium profiles, feet, 30 LEDs
- 24 V power supplywith wiring routed inside the profile
- Wheeled transport case40 × 30 × 115 cm
- Graphic as configuredsingle-sided from €73.70 excl. VAT, double-sided at double the price
- Design checkPreview for approval before printing
From design to dispatch
Before printing, we send you a preview for approval. If you don't have a finished design, send us your logo and materials, and we'll put together a proposal for a surcharge via the configurator.
- Configuration
You choose single- or double-sided print or just the frame, then design and production time. The price is calculated instantly.
- Design and preview
You upload your design in the configurator: a PDF or vector file with text converted to outlines, in CMYK, at a ratio of 100 × 250 cm plus bleed. Before printing you receive a preview for approval.
- Printing and sewing
Sublimation printing on SEG fabric for backlighting, hemmed with a silicone edge to fit the 12 cm profile.
- Dispatch
The frame alone is dispatched in 3 working days. With print, 5 working days from design approval, or 3 days in express for a surcharge of €35.10 excl. VAT. The frame is shipped in its case, by courier.
Applications
- Trade show stands
- Showrooms and retail spaces
- Reception and lobby
- Conferences and stages
- Sales areas
- Events and launches
Business orders
- Invoice with VAT shown separately
- Frame from stock in Poland
- Payment by bank transfer or PayPal
- Delivery by courier
What customers say.
Only customers who bought the product can leave a review. After delivery, we'll ask for your rating by email.
How do we verify reviews?
We only publish reviews from customers who bought the product from Vitasystem. We verify the purchase against the order: via the link in the email sent after delivery, or using the order number and email address. We publish all reviews — positive and critical. We only reject content containing personal data, offensive language, advertising or content unrelated to the product. We do not pay for or reward reviews.
