LED BOX PLUS Light Wall 200x200 cm – double-sided with print
LED BOX PLUS light wall 200x200 cm: a square LED wall, 2 × 2 m. It proves itself everywhere visibility counts: trade show stands, showrooms, sales zones. Double-sided aluminium frame with a 10 cm profile, 64 LEDs at 24 V, SEG fabric graphic with silicone edge, tool-free assembly, carry bag included. Choose single- or double-sided print, design and lead time in the configurator. We dispatch the frame alone in 3 working days, with print in 5, in express in 3.
from €355.90 excl. VAT
The price depends on the selected variant. You can check the set contents, printing and lead time in the configurator below.
Loading configuration options…
Double-sided LED wall 200 × 200 cm with your own graphics: frame only in 3 days, with print in 5 working days
A square LED wall, 2 × 2 m. Four square metres of backlit graphics in a square: a 2 m wide stand backdrop, visible from the trade show aisle. The LED BOX PLUS frame has a 10 cm aluminium profile, 64 LEDs at 24 V inside the profiles, and the SEG fabric graphic is fitted into the profile with a silicone edge, without tools. Choose single- or double-sided print, artwork design and production time in the configurator.
- 3 daysWorking days for the frame alone, 5 with print, 3 in express
- 200 × 200 cmbacklit graphics on both sides
- 64 LEDs24 V LEDs in the 10 cm profile
- 15.2 kgweight of the frame with bag
Light from within, instead of a lamp above the stand
The LEDs sit in the profile and shine through the fabric, so the graphic is evenly bright across the whole surface and stays legible even in dimly lit rooms.
- Lit by 64 LEDs
24 V power supply. The light spreads evenly across the fabric with no visible hotspots.
- Double-sided display
Both sides of the frame take an SEG graphic. You can order double-sided print, or single-sided with white fabric on the back.
- 10 cm aluminium profile
The profile stiffens the frame and houses the LEDs along with the wiring. The frame stands on two flat feet, with no visible cables.
- Tool-free assembly
The profiles connect with snap joints, and the graphic with its silicone edge is pressed into the groove. Two people can assemble the wall in under a quarter of an hour.
- Dye sublimation for lighting
SEG backlit fabric, full colour, rich tones when lit. You can swap the graphic for the next campaign without changing the frame.
- Bag included
Profiles, feet, power supply and fabric are delivered in a 108 × 32 × 18 cm bag.
Four formats
LED BOX PLUS 200x200 is a square LED wall, 2 × 2 m. Four formats: 200 and 300 cm width at 200 or 240 cm height. 10 cm profile, crossbar with LED strip, two power supplies, carry bag.
- Wall dimensions
- 200 × 200 cm
- Graphic area
- 4 m² per side
- Weight with bag
- 15.2 kg
- Sizes in the range
- 200 × 200, 200 × 240, 300 × 200 and 300 × 240 cm
- Profile
- Aluminium, 10 cm
- LEDs
- 64 pcs, 24 V
- Power supply
- 2 pcs, included in the set
- Weight
- 15.2 kg
- Packaging
- Bag 108 × 32 × 18 cm
- Format
- 200 × 200 cm (4 m²)
- Fabric
- SEG polyester for lighting
- Fitting
- Silicone edge
- Sublimation, full colour, single-sided or double-sided
- Graphic change
- tool-free, in a few minutes
What's included in the base price
Frame with LEDs, two power supplies and carry bag. You add the graphic in the configurator: single-sided, double-sided, or you can order just the frame for your own print.
- LED BOX PLUS frame10 cm aluminium profiles, feet, 64 LEDs
- Two 24 V power supplieswith wiring routed inside the profile
- Carry bagBag 108 × 32 × 18 cm
- Graphic as configuredsingle-sided from €117.70 excl. VAT, double-sided at double the price
- File checkPreview for approval before printing
From artwork to dispatch
Before printing, we send you a preview for approval. If you don't have finished artwork, send us your logo and materials – we'll put together a proposal for a surcharge as shown in the configurator.
- Configuration
You choose single- or double-sided print or just the frame, then artwork design and production time. The price is calculated instantly.
- Artwork and preview
You upload your artwork in the configurator: a PDF or vector file with text converted to paths, in CMYK, at an aspect ratio of 200 × 200 cm plus bleed. Before printing you receive a preview for approval.
- Printing and sewing
Sublimation printing on SEG fabric for lighting, hemmed with a silicone edge to fit the 10 cm profile.
- Dispatch
The frame alone leaves us in 3 working days. With print, 5 working days from artwork approval, or 3 days in express for a surcharge of €35.10 excl. VAT. The frame is shipped in its bag, by courier.
Where it proves its worth
- Trade show stands
- Showrooms and retail spaces
- Reception areas and lobbies
- Conferences and stages
- Sales zones
- Events and launches
Business orders
- Invoice with VAT shown separately
- Frame from our stock in Poland
- Payment by bank transfer or PayPal
- Delivery by courier
What customers say.
Only customers who bought the product can leave a review. After delivery, we'll ask for your rating by email.
How do we verify reviews?
We only publish reviews from customers who bought the product from Vitasystem. We verify the purchase against the order: via the link in the email sent after delivery, or using the order number and email address. We publish all reviews — positive and critical. We only reject content containing personal data, offensive language, advertising or content unrelated to the product. We do not pay for or reward reviews.
