LED BOX 2.0 Light Wall 100x250 cm – double-sided with print
LED BOX 2.0 light wall 100x250 cm: the tallest LED BOX 2.0 tower at 2.5 m. It proves itself wherever visibility counts: exhibition halls, stages, backdrops for photos and performances. Double-sided aluminium frame with an 8 cm profile, 88 LEDs at 24 V, SEG fabric graphic with silicone edge, tool-free assembly, transport box with instructions included. Choose single- or double-sided print, artwork and lead time in the configurator. The frame alone is dispatched in 3 working days, with print in 5, in express in 3.
from €194.90 excl. VAT
The price depends on the selected variant. You can check the set contents, printing and lead time in the configurator below.
Loading configuration options…
Double-sided LED wall 100 × 250 cm with your own graphics: frame only in 3 days, with print in 5 working days
The tallest LED BOX 2.0 tower at 2.5 m. Two and a half metres of backlit graphics on one metre of width: the height of a trade show wall in a format you can transport in a single box. The LED BOX 2.0 frame has an 8 cm aluminium profile, 88 LEDs at 24 V inside the profiles, and the SEG fabric graphic is fitted into the profile with a silicone edge, without tools. Choose single- or double-sided print, artwork and lead time in the configurator.
- 3 daysWorking days for the frame alone, 5 with print, 3 in express
- 100 × 250 cmbacklit graphics on both sides
- 88 LEDs24 V LEDs in the 8 cm profile
- 12 kgweight of the frame with packaging
Light from within, instead of a lamp above the stand
The LEDs sit in the profile and shine through the fabric, so the graphic is evenly bright across the whole surface and stays legible even in dimly lit rooms.
- Lit by 88 LEDs
24 V power supply. The light spreads evenly across the fabric with no visible hotspots.
- Double-sided display
Both sides of the frame take an SEG graphic. You can order double-sided print, or single-sided with white fabric on the back.
- 8 cm aluminium profile
The profile stiffens the frame and houses the LEDs along with the wiring. The frame stands on two flat feet, with no visible cables.
- Tool-free assembly
The profiles connect with snap joints, and the graphic with its silicone edge is pressed into the groove. One person can assemble the frame in a few minutes.
- Dye sublimation for backlighting
SEG backlit fabric, full colour, rich tones when lit. You can swap the graphic for the next campaign without changing the frame.
- Box included
Profiles, feet, power supply and fabric travel in a 133 × 22 × 12 cm box.
Three heights of the same tower
LED BOX 2.0 100x250 is the tallest LED BOX 2.0 tower at 2.5 m. Three heights of the same tower: 200, 230 and 250 cm. Same profile, same feet and the same way of fitting the graphic; what differs is the number of LEDs and the weight.
- Wall dimensions
- 100 × 250 cm
- Graphic area
- 2.5 m² per side
- Weight with box
- 12 kg
- Sizes in the range
- 100 × 200, 100 × 230 and 100 × 250 cm
- Profile
- Aluminium, 8 cm
- Frame colour
- Silver or black
- LEDs
- 88 pcs, 24 V
- Power supply
- included
- Weight
- 12 kg
- Packaging
- Box 133 × 22 × 12 cm
- Format
- 100 × 250 cm (2.5 m²)
- Fabric
- SEG polyester for backlighting
- Fitting
- Silicone edge
- Sublimation, full colour, single- or double-sided
- Graphic change
- tool-free, in a few minutes
What's included in the base price
Frame with LEDs, power supply and transport box with instructions. You add the graphic in the configurator: single-sided, double-sided, or you can order just the frame for your own print.
- LED BOX 2.0 frame8 cm aluminium profiles, feet, 88 LEDs
- 24 V power supplywith wiring routed inside the profile
- Transport box with instructionsBox 133 × 22 × 12 cm
- Graphic as configuredsingle-sided from €73.70 excl. VAT, double-sided at double the price
- Artwork checkPreview for approval before printing
From artwork to dispatch
Before printing, we send you a preview for approval. If you don't have finished artwork, send us your logo and materials, and we'll put together a proposal for a surcharge from the configurator.
- Configuration
You choose single- or double-sided print or just the frame, the frame colour, then artwork and lead time. The price is calculated instantly.
- Artwork and preview
You upload your artwork in the configurator: a PDF or vector file with text converted to paths, in CMYK, at a ratio of 100 × 250 cm plus bleed. Before printing you receive a preview for approval.
- Printing and sewing
Sublimation printing on SEG fabric for backlighting, edged with a silicone edge to fit the 8 cm profile.
- Dispatch
The frame alone is dispatched in 3 working days. With print, 5 working days from artwork approval, or 3 days in express for a surcharge of €35.10 excl. VAT. The frame travels in its box, by courier.
Where it proves its worth
- Trade show stands
- Showrooms and retail spaces
- Reception areas and lobbies
- Conferences and stages
- Sales areas
- Events and launches
Business orders
- Invoice with VAT shown separately
- Frame from stock in Poland
- Payment by bank transfer or PayPal
- Delivery by courier
What customers say.
Only customers who bought the product can leave a review. After delivery, we'll ask for your rating by email.
How do we verify reviews?
We only publish reviews from customers who bought the product from Vitasystem. We verify the purchase against the order: via the link in the email sent after delivery, or using the order number and email address. We publish all reviews — positive and critical. We only reject content containing personal data, offensive language, advertising or content unrelated to the product. We do not pay for or reward reviews.
