- SKU
- VP-25
- Availability
- Available
- Base offer including VAT
- €633.20
Backlit wall: frame only or with print, six widths
The aluminium frame with a full-surface LED curtain lights the graphic evenly from edge to edge. The back lets no light through, so the colours on the front are bright and saturated. The SEG graphic with silicone edge slots into the profile groove, and the whole kit travels in a wheeled case.
- 160/mLEDs per metre of width
- 6.5 cmaluminium frame profile
- optionalsingle-sided fabric print
- 5 daysworking days from design approval
Preview on the 3D model with backlight

The whole graphic glows, not just the edges
The LED curtain behind the fabric gives even light across the whole surface. The difference shows from the far end of the hall.
- Even backlighting
Full-surface LED curtain, 160 LEDs per metre of width, no brighter bands.
- Closed back
The back of the curtain lets no light through, so all the light goes into the graphic.
- Tool-free assembly
Profiles joined by their markings, graphic pressed into the groove by its silicone edge.
- Dye-sublimation print
Full colour on backlit fabric. Further graphics can be ordered for the same frame.
- B1 standard
LED curtain tested for flame retardancy to the B1 standard.
- Wheeled case
Frame, curtain and power supplies travel in a case; two cases from 400 cm.
Six widths, always 250 cm high
The anodised aluminium frame assembles without tools, and the SEG graphic slots into the profile groove. Weights and LED counts for every size are in the description.

- Height
- 250 cm
- Widths
- 100, 200, 300, 400, 500, 600 cm
- Frame profile
- 6.5 cm
- Feet
- 40 × 6 cm
- Frame
- anodised aluminium, 6.5 cm profile
- LEDs
- 160 per metre, approx. 96 W/m
- Light colour
- cool white 7000–8000 K
- Power
- 100–240 V, one power supply per metre
- Fixing
- SEG, 3 × 12 mm groove
- dye sublimation, single-sided, optional
- Kit weight
- 17.75–61.1 kg
- Transport
- 1 or 2 wheeled cases
LED curtainLED strips across the entire frame
LED strips160 LEDs per metre of width
Frame cornerlight reaches right to the edge
6.5 cm profile3 × 12 mm groove for the silicone edge
Marked connectorsassembly by numbers, no tools
Feet 40 × 6 cmflat, stable, aluminium
Frame, light and case
Everything the wall needs to glow straight out of the case. Accessories for stand builds are selected in the configurator.

- Frame with LED curtain6.5 cm profile, 160 LEDs per metre
- Power suppliesone per metre of width
- Feet2 or 4 depending on width
- Graphicoptional: dye sublimation with SEG silicone edge
- Casetwo cases from 400 cm
From design to dispatch
Before printing we send a proof for approval. No design of your own? Select graphic design and we will prepare it from your materials.
- Graphic
Upload the design in the 3D Studio and check it on the model with the backlight on, or download the 1:10 PDF template.
- Proof
Before printing you receive a proof for approval.
- Printing and sewing
Dye sublimation on backlit fabric, finished with a silicone edge for the profile groove.
- Shipping
Production in 5 working days from approval; the kit ships by courier in a wheeled case.
Where it works best
- Exhibition stands
- Photo walls and PR
- Showrooms
- Conferences and stages
- Shop windows and receptions
Business orders
- VAT invoice
- Frame only or with print
- Bank transfer or online payment
- 3D preview with backlight
A graphic that glows from within
The LED Backlight wall is an aluminium fabric frame with an LED curtain: light strips spread evenly across the entire surface behind the graphic. We dye-sublimation print the graphic on backlit fabric, sew a SEG silicone edge around it and press it into the profile groove (SEG system). The back of the curtain is blockout, so all the light goes forward and the colours stay bright and saturated, even in daylight and under strong hall lighting.
The wall comes in six widths: 100, 200, 300, 400, 500 and 600 × 250 cm. The construction is the same in every size; only the number of LEDs, power supplies and feet changes.
Dimensions, lighting and weight
| Size | LEDs (power) | Power supplies | Feet | Frame weight | Kit with case | Transport |
|---|---|---|---|---|---|---|
| 100 × 250 cm | 160 (96 W) | 1 power supply | 2 | 9.95 kg | 17.75 kg | 1 case |
| 200 × 250 cm | 320 (192 W) | 2 power supplies | 2 | 15 kg | 25.3 kg | 1 case |
| 300 × 250 cm | 480 (288 W) | 3 power supplies | 2 | 20 kg | 32.6 kg | 1 case |
| 400 × 250 cm | 640 (384 W) | 4 power supplies | 4 | 25.1 kg | 45.7 kg | 2 cases |
| 500 × 250 cm | 800 (480 W) | 5 power supplies | 4 | 30.2 kg | 53.4 kg | 2 cases |
| 600 × 250 cm | 960 (576 W) | 6 power supplies | 4 | 35.3 kg | 61.1 kg | 2 cases |
Data from the manufacturer's technical sheets: 160 LEDs per metre of width, each 0.6 W and 60–70 lm, cool white light 7000–8000 K. Height is always 250 cm, profile 6.5 cm.
Construction
- Frame in anodised aluminium, 6.5 cm profile with 2 mm walls, ABS plastic connectors.
- LED curtain across the whole frame lights the graphic evenly, with no brighter bands at the edges.
- Closed back: the curtain lets no light through at the back. One side lights up, the front.
- SEG graphic with a silicone edge slots into the 3 × 12 mm groove; changing the graphic takes a few minutes, and the frame lasts for years.
- Feet 40 × 6 cm; walls from 400 cm have four: two outer and two central.
Tool-free assembly
- Join the frame profiles following the markings on the connectors and screw on the feet.
- Clip in the LED curtain and plug the power supplies into a 100–240 V socket.
- Press the silicone edge of the graphic into the profile groove, starting at the corners.
Accessories for stand builds
- Half feet (2 pcs), €18.00 excl. VAT: the wall stands right against a wall or in a corner.
- 90° connector (2 pcs), €13.20 excl. VAT: joins two walls into a stand corner.
- Roof connectors (4 pcs), €19.70 excl. VAT: for stand builds with a roof.
What's included
Frame with LED curtain, 100–240 V power supplies (one per metre of width), feet and a wheeled case (two cases from 400 cm); graphic with single-sided print optional.
Design and production
- Upload your graphic in the 3D Studio and see it on the model straight away, with the backlight on or off. You can also download a 1:10 scale PDF template.
- You can buy the frame with LED curtain on its own or together with the graphic. The print is single-sided because the wall lights up towards the front.
- No design yet? Select graphic design (€85.00 excl. VAT) and we will prepare it from your materials.
- Before printing we send a proof for approval. Production takes 5 working days from approval, and the kit ships by courier in a wheeled case.
Good to know
before you order.
Can I buy the frame only?
Yes. The base price covers the structure: frame with LED curtain, power supplies, feet and case. You add the graphic in the chosen size with single-sided print in the configurator, the surcharge depends on the width. The wall lights up towards the front, so the print is single-sided.
How bright is the backlight?
Each metre of width has 160 LEDs at 0.6 W, i.e. about 96 W and 9,600–11,200 lm of cool white 7000–8000 K light, spread evenly across the whole graphic.
Does the wall light up on both sides?
No. The front lights up, and the back of the curtain is blockout, which makes the front graphic brighter. From behind you see a uniform dark surface.
How do I prepare the design?
Upload a JPG, PNG or WebP in the 3D Studio and set the crop on the model, or download the 1:10 scale PDF template, fill it in and upload it. Before printing we send you a proof for approval.
How much does the wall weigh and how is it transported?
From 17.75 kg (100 × 250 cm) to 61.1 kg (600 × 250 cm) with cases. Up to 300 cm the kit fits in one wheeled case, from 400 cm in two.
Can I connect several walls?
Yes. The 90° connector (€13.20 excl. VAT for 2 pcs) joins two walls into a corner, the roof connectors (€19.70 excl. VAT for 4 pcs) let you build a stand with a roof, and the half feet (€18.00 excl. VAT for 2 pcs) let the wall stand right against a wall.
Can I replace the graphic later?
Yes. The graphic comes out of the profile groove by its silicone edge in a few minutes. A new graphic in the same size can be ordered separately and fitted to the same frame.
How long does production take?
Production takes 5 working days from design approval. We ship the kit by courier in a wheeled case, or in two cases from 400 cm.
What customers say.
Only customers who bought the product can leave a review. After delivery, we'll ask for your rating by email.
How do we verify reviews?
We only publish reviews from customers who bought the product from Vitasystem. We verify the purchase against the order: via the link in the email sent after delivery, or using the order number and email address. We publish all reviews — positive and critical. We only reject content containing personal data, offensive language, advertising or content unrelated to the product. We do not pay for or reward reviews.






